Filling Compound for Optical Fiber Cable BN-400
Filling Compound for Optical Fiber Cable BN-400
BN-400.png
  • Product Detail
  • Product introduction

    Filling compound for optical fiber cable adopts high viscosity GTL process oil, high molecular synthetic material and organic thickener as main base materials, They are combined to be non-silicon optical fiber filing gel by advanced production technique whose features are low density, excellent temperature performance, high thixotropic index, wide application, tiny acid value and hydrogen evolution value, Type AC-E008 also has steadily temperature performance between -45"C to 80°C. According to various requirements of clients, the technical index of viscosity, penetration, thixotropic and etc. could be adjust in order to satisfy requirements of filling technique.

     

    Product characteristics

    Non-silicon fiber filing gel, low density, high-and-low temperature performance excellent thixotropic property, excellent water resistance, wide universality, tiny acid value and hydrogen evolution values

    Applications: Apply to filling in the optical fiber (bundle) or optical fiber loose casing or skeleton groove, to prevent water into cable vertically infiltrating, to provide good functions of waterproof, moisture proof, buffering to optical fiber.

     

    General Technical Requirements

    Filing gel is needed to be homogeneous, hydrogen absorption, and does not include any dust, metal particles, and other impurities. lt should be no sight visible air bubbles, and the mold should be no nutrition. Filling gel should be non-toxic, no stimulation to the skin.

     

    Environmental performance requirements

    TypematterProhibitive content [mg/kg]
    Heavy metalplumbic≤1000
    cadmium≤100
    mercury≤1000

    Hexavalent

    chromium

    ≤1000
    Organlc Bromlde

    Polybrominated

    biphenyls( PBB)

    ≤1000

    Polybrominated

    diphenyls ethers

    (PBDE)

    ≤1000

    Technical parameter

    Serial NumberltemsUnitIndex
    1appearance 

    Homogeneous,

    no impurities

    2Dropping point℃≥200
    3density ( 20℃ )g/c㎡≤0.88
    4Cone penetration25℃-40℃

    1/10mm

    1/10mm

    ≥400

    ≥230

    5Color stability(130℃、120h ] ≤2.5
    6Oxidation induction time(190℃)min≥30
    7Flashing point℃≥220
    8Hydrogen evolution(80'℃、24h)ul/g≤0.03
    9Oil perspiring( 80℃、24h)%≤0.5
    10Evaporation capacity(80℃、24h)%≤0.5
    11Water resistance(20℃、7d) Non-disassembly
    12Acid valuemgKОH/g≤0.3
    13Water content%≤0.01
    14viscosity(25℃、D=6S-')mpa.s22000±6600
    15

    compatibility:

    A、 with optical fiber, optical fiber coating materials

    (85℃、30x24h)

    B、with pine casing material(85℃、30x24h)variation in tensile strength elongation at break

    mass variation

    C、Composite metal band(68℃、7x24h)Steel-plastic composite tape、Aluminum plastic compound tape

    %

    %

    %

    No color fading,

    No migration,

    no delamination,

    no cracking Maximum release force

    1.0N~8.9N

    Average value

    1.0N-5.ON

    no delamination no cracking ≤25 ≤30 ≤3

    no delamination no cracking

    16corrosive(80℃、14x24h) with copper, aluminum, steel No corrosion points

Filling Compound for Optical Fiber Cable BN-400

Filling compound for optical fiber cable adopts high viscosity GTL process oil, high molecular synthetic material and organic thickener as main base materials, They are combined to be non-silicon optical fiber filing gel by advanced production technique whose features are low density, excellent temperature performance, high thixotropic index, wide application, tiny acid value and hydrogen evolution value, Type AC-E008 also has steadily temperature performance between -45"C to 80°C. According to various requirements of clients, the technical index of viscosity, penetration, thixotropic and etc. could be adjust in order to satisfy requirements of filling technique.

Key Words:

Filling Compound

Factory

factory
factory
factory
factory
factory
factory

FAQ

How can I get a quotation?

Simply send us your inquiry with detailed specifications (product type, quantity, standards). Our sales team will provide a quotation within 24 hours.

Could I visit your factory?

Yes, we welcome and encourage factory visits. It provides an excellent opportunity for clients to gain firsthand insight into our production processes, technical capabilities, and quality control standards.

What payment methods do you accept?

We accept T/T, PayPal, and L/C at sight. Other options may be negotiable depending on the order.

How do you ship the products?

We support multiple shipping options: 1.Express (DHL, FedEx, UPS, TNT) for small orders; 2.Air freight or sea freight for bulk shipments; 3.EXW, FOB, CIF, and DDP terms are available.

What are your main export markets?

Our products are widely used in telecom operators, data centers, ISPs, and system integrators across Asia, Europe, North America, and the Middle East.

Do you provide technical support?

Yes. Our engineering team offers professional technical support, including product selection, network design advice, and troubleshooting assistance.

Related Products

Product Inquiry

We will contact you within one business day. Please pay attention to your mail.

%{tishi_zhanwei}%