- Product Detail
-
Product introduction
Flooding Compound for optical fiber cable adopts GTL process oil and high molecular synthetic material as main base materials. They are combined to be soft, low-viscosity, high thixotropic index, colorless transparent filling gel by advanced production technique whose features has water repellency ,excellent processing technic and high- and-low temperature properties. lt can keep soft under -40℃ and no-drip on the high temperature of 80℃Filling process is simple which can be filled at general temperature, especially suitable for particular cable sheath and cable core. According to various requirements of clients, the technical index of viscosity, penetration, thixotropic and etc. that could be adjust in order to satisfy requirements of filling technique.
Product characteristics
Water repellency optical cable filling gel, high water-resistance, low density, good high.and-low temperature performance, high thixotropic index, wide universality, tiny acid value and hydrogen evolution values
Applications: Apply to filling the gap of optical fiber loose casing, filling the gap of strand modules in composite cable, to prevent water or moisture into cable vertically infiltrating to provide good functions of waterproof, moisture proof, water resistance to opt.
General Technical Requirements
Filling gel is needed to be homogeneous, hydrogen absorption, and does not include any dust, metal particles, and other impurities. it should be no sight visible air bubbles, and the mold should be no nutrition, Filling gel should be non-toxic, no stimulation to the skin.
Environmental performance requirements
Type matter Prohibitive content [ mg/kg] Heavy metal plumbic ≤1000 cadmium ≤100 mercury ≤1000 Hexavalent
chromium
≤1000 Organic Bromide Polybrominated
biphenyls( PBB)
≤1000 Polybrominated
diphenyls ethers
(PBDE)
≤1000 Technical parameter
Serial Number ltems Unit Index 1 appearance Homogeneous,
no impurities
2 Dropping point ℃ ≥150 3 density ( 20℃ ) g/c㎡ ≤0.96 4 Cone penetration25℃-40℃ 1/10mm ≥300 1/10mm ≥100 5 Oxidation penetration time (190℃) min ≥30 6 Flashing point ℃ >220 7 Hydrogen evolution(80'℃、24h) ul/g ≤0.03 8 Oil perspiring( 80℃、24h) % ≤2.0 9 Evaporation capacity(80℃、24h) % ≤1.0 10 Absorbency Time 25℃(15g sample+10g water) min ≤2.0 11 Dilatation 25℃ 5r
100g sample+50g water 24h
% ≥15 % ≥70 12 Acid value mgKОH/g ≤1.0 13 Water content % ≤0.1 14 viscosity(25℃、D=20S-') mpa.s 10500±30000 15 compatibility:
A、 with pine casing material,
(85℃、30x24h)
B、with pine casing material(85℃、45x24h)variation in tensile strength elongation at break
mass variation
C、with pine casing insulation
material(80℃、28 x24h)
variation in tensile strength elongation at break mass variation
D、Composite metal band (68℃、7x24h)Steel-plastic composite tape、Aluminum plastic compound tape
%
%
%
%
%
%
no delamination no cracking
≤25 ≤30 ≤3
no cracking
≤25 ≤25 ≤15
no delamination
no cracking
16 corrosive(80℃、14x24h) with copper, aluminum, steel No corrosion points
Flooding compound for optical fiber cable BN-90
Flooding Compound for optical fiber cable adopts GTL process oil and high molecular synthetic material as main base materials. They are combined to be soft, low-viscosity, high thixotropic index, colorless transparent filling gel by advanced production technique whose features has water repellency ,excellent processing technic and high- and-low temperature properties. lt can keep soft under -40℃ and no-drip on the high temperature of 80℃Filling process is simple which can be filled at general temperature, especially suitable for particular cable sheath and cable core. According to various requirements of clients, the technical index of viscosity, penetration, thixotropic and etc. that could be adjust in order to satisfy requirements of filling technique.
Subcategory:
Key Words:
Flooding compound
optical cable
Factory
FAQ
How can I get a quotation?
Simply send us your inquiry with detailed specifications (product type, quantity, standards). Our sales team will provide a quotation within 24 hours.
Could I visit your factory?
Yes, we welcome and encourage factory visits. It provides an excellent opportunity for clients to gain firsthand insight into our production processes, technical capabilities, and quality control standards.
What payment methods do you accept?
We accept T/T, PayPal, and L/C at sight. Other options may be negotiable depending on the order.
How do you ship the products?
We support multiple shipping options: 1.Express (DHL, FedEx, UPS, TNT) for small orders; 2.Air freight or sea freight for bulk shipments; 3.EXW, FOB, CIF, and DDP terms are available.
What are your main export markets?
Our products are widely used in telecom operators, data centers, ISPs, and system integrators across Asia, Europe, North America, and the Middle East.
Do you provide technical support?
Yes. Our engineering team offers professional technical support, including product selection, network design advice, and troubleshooting assistance.