- Product Detail
-
■Product description
AL-Covered Stainless Steel Tube OPGW integrates optical fibers into an overhead ground wire used on transmission lines. The fibers are protected inside a sealed stainless-steel loose tube that is covered with an aluminum layer (SUS/AL optical unit). The surrounding metallic strands provide the required mechanical strength, lightning shielding, and fault-current return capability for utility applications. This construction is commonly selected when the line corridor requires improved corrosion robustness and electrochemical compatibility with aluminum-based outer strands.
■Typical construction
1.Central optical unit (SUS/AL):
Stainless steel loose tube, hermetically sealed
Aluminum covering over the stainless steel tube (SUS/AL)
Water-blocking filling compound (gel) for moisture protection and cushioning
Single-mode optical fibers placed with engineered excess length (design-dependent)
2.Stranded metallic layers (mechanical + electrical):
Aluminum-clad steel wires (ACS) and/or aluminum alloy wires (AA)
Optional steel strands (project-dependent)
One or two stranded layers depending on RTS and short-circuit requirements
3.Water-blocking and protection (options):
Water-blocking yarns/tapes within the cable interstices (as required)
Anti-corrosion greases or compounds (application-dependent)
■Key features
SUS/AL optical unit: aluminum-covered interface helps improve compatibility with aluminum-based outer layers in demanding environments.
Utility-grade mechanical design: strand mix can be optimized for targeted rated tensile strength (RTS/RBS) and sag-tension performance.
Electrical function retained: designed to operate as an overhead ground wire for lightning shielding and fault-current return.
Stable optical performance: fibers protected in a sealed, gel-filled metallic tube; fiber strain is managed by controlled excess length design.
■Standards and typical compliance
OPGW performance and test requirements: IEEE 1138 (commonly specified)
Aerial optical cables for power lines (OPGW family): IEC 60794-4-10 (commonly referenced)
Optical fiber and cable test methods: IEC 60793 / IEC 60794 series
Fiber recommendations: ITU-T (e.g., G.652, G.655), per project selection
■Technical specification
1.Optical specification (selectable)
Item Specification Fiber type Single-mode per ITU-T (e.g., G.652.D, G.655) or as specified Fiber count Project-specified; configuration depends on tube size and design Fiber protection Gel-filled metallic loose tube; controlled fiber excess length design Fiber identification Standard color sequence and mapping list provided with delivery Attenuation / dispersion / PMD Declared by selected fiber type and supplier’s fiber specification; provided in final datasheet 2.Optical unit (SUS/AL) specification
Item Specification Tube base material Stainless steel Tube covering Aluminum covering over stainless tube (SUS/AL optical unit) Sealing Hermetically sealed tube design (project-dependent method) Filling Water-blocking compound (gel) Corrosion concept Aluminum-covered interface to improve electrochemical compatibility with aluminum-based outer strands 3.Metallic strand specification (selectable)
Item Specification Strand materials Aluminum-clad steel (ACS), aluminum alloy (AA), optional steel (as specified) Strand configuration Single or double layer; strand diameter and count per design Direction of lay S or Z (as specified) Surface condition As specified (e.g., aluminum-based strands; other strand finishes per project) 4.Mechanical performance (guaranteed per design)
Parameter How it is specified Rated tensile strength (RTS/RBS) Guaranteed minimum breaking strength of completed OPGW Everyday stress (EDS) Utility/line designer specified; used for sag-tension design Elastic modulus / coefficient of thermal expansion Declared for the completed cable design Outer diameter (OD) Guaranteed for the supplied design Weight Guaranteed for the supplied design Minimum bending radius Declared for installation and permanent condition (defined as a multiple of OD or as an absolute value in the datasheet) Vibration / aeolian performance Evaluated per project requirements and applicable test methods 5.Electrical performance (guaranteed per design)
Parameter How it is specified DC resistance Declared at reference temperature for the completed cable Short-circuit capacity Declared as thermal rating (commonly I²t, kA²·s) and/or current vs duration limits Maximum permissible temperature Declared for continuous operation and short-circuit event (per specification) Lightning shielding function Achieved through metallic cross-section and placement as overhead ground wire ■Testing and quality control
(Per contract: type tests / routine tests / acceptance tests.)
Typical test scope may include:Dimensional inspection (OD, strand count, lay length)
Mechanical tests (breaking strength, elongation behavior)
Electrical tests (DC resistance; short-circuit rating validation per agreed method)
Optical verification (fiber count, continuity, attenuation at specified wavelengths)
Environmental integrity checks of the optical unit (seal integrity and water-blocking performance per agreed plan)
■Packaging and delivery
Supplied on wooden or steel-reinforced reels suitable for overhead cable transport
Reel length, maximum gross weight, and labeling per purchase order
Standard delivery documents: packing list, cable marking record, fiber schedule, test reports, and final guaranteed datasheet
■Ordering information
- To provide a buildable design and guaranteed datasheet, please specify:
- Installation environment (coastal, industrial pollution, normal)
- Required fiber count and fiber type (e.g., G.652.D / G.655)
- Target OD and weight limits (especially for shield-wire replacement)
- Required RTS/RBS and span data (wind/ice loads, ruling span)
- Required short-circuit rating (I²t or current-duration) and any temperature limits
- Preferred strand mix (ACS/AA) if specified by utility standards
- Reel length requirement and transport constraints
AL-Covered Stainless Steel Tube OPGW (SUS/AL Optical Unit) – Corrosion-Resistant Optical Ground Wire
AL-Covered Stainless Steel Tube OPGW integrates optical fibers into an overhead ground wire used on transmission lines. The fibers are protected inside a sealed stainless-steel loose tube that is covered with an aluminum layer (SUS/AL optical unit). The surrounding metallic strands provide the required mechanical strength, lightning shielding, and fault-current return capability for utility applications. This construction is commonly selected when the line corridor requires improved corrosion robustness and electrochemical compatibility with aluminum-based outer strands.
Subcategory:
Key Words:
Factory
FAQ
How can I get a quotation?
Simply send us your inquiry with detailed specifications (product type, quantity, standards). Our sales team will provide a quotation within 24 hours.
Could I visit your factory?
Yes, we welcome and encourage factory visits. It provides an excellent opportunity for clients to gain firsthand insight into our production processes, technical capabilities, and quality control standards.
What payment methods do you accept?
We accept T/T, PayPal, and L/C at sight. Other options may be negotiable depending on the order.
How do you ship the products?
We support multiple shipping options: 1.Express (DHL, FedEx, UPS, TNT) for small orders; 2.Air freight or sea freight for bulk shipments; 3.EXW, FOB, CIF, and DDP terms are available.
What are your main export markets?
Our products are widely used in telecom operators, data centers, ISPs, and system integrators across Asia, Europe, North America, and the Middle East.
Do you provide technical support?
Yes. Our engineering team offers professional technical support, including product selection, network design advice, and troubleshooting assistance.