- Product Detail
-
■Product description
Aluminum Tube / Aluminum Pipe OPGW is an overhead ground wire that integrates optical fibers for communications while maintaining the grounding and shielding function of a conventional earth wire. The optical fibers are housed in a central aluminum tube (or aluminum pipe). The surrounding metallic strands provide the required rated tensile strength (RTS/RBS) and fault-current return capability for transmission line service. This design is often selected where a lightweight optical unit, good crush resistance, and a fully metallic construction are preferred.
■Typical construction
1.Central optical unit (Aluminum Tube / Pipe)
Aluminum tube / aluminum pipe forming the optical unit
Optical fibers placed with engineered excess length (design-dependent)
Water-blocking filling compound (gel) or equivalent moisture protection system (project specified)
Tube sealing method as specified in the final design (per test plan)
2.Metallic stranded layers (mechanical + electrical)
One or more layers of stranded metallic wires, commonly:
Aluminum-clad steel (ACS) wires
Aluminum alloy (AA) wires
Optional steel strands (utility specification dependent)
Layer count and strand mix defined to meet the required RTS and electrical thermal rating
3.Water-blocking (options)
Water-blocking yarns / tapes in interstices (as required)
Anti-corrosion compounds for stranded layers (application dependent)
■Key features
Aluminum tube optical unit: provides a robust metallic enclosure for fibers with favorable handling and crush resistance characteristics.
Mechanical design flexibility: strand materials and cross-section can be balanced for the target RTS, sag-tension behavior, and weight limits.
Electrical performance: metallic cross-section supports lightning shielding and return of fault currents when installed as overhead ground wire.
Optical stability: fibers are protected inside the metallic tube and placed with controlled excess length to manage service strain.
■Standards and typical compliance
OPGW construction / performance testing: IEEE 1138 (commonly specified)
Aerial optical cables along power lines (OPGW family): IEC 60794-4-10 (commonly referenced)
Optical fiber and cable test methods: IEC 60793 / IEC 60794 series
Fiber recommendations: ITU-T (e.g., G.652, G.655), as specified
■Technical specification
1.Optical specification (selectable)
Item Specification Fiber type Single-mode per ITU-T (e.g., G.652.D, G.655) or as specified Fiber count Project-specified (depends on tube ID, fiber type, and design layout) Fiber protection Metallic tube enclosure + water-blocking system (gel or equivalent) Fiber identification Standard color sequence; fiber mapping list supplied with delivery Optical performance Attenuation, dispersion, PMD declared per selected fiber specification and provided in final datasheet 2.Aluminum tube / pipe optical unit specification
Item Specification Tube material Aluminum (grade per design) Tube form Tube or pipe optical unit (design variant per project) Tube sealing As specified and validated by the agreed test plan Filling / moisture protection Gel filling or equivalent water-blocking system (project specified) Crush / handling Declared in the final datasheet and validated by agreed tests 3.Metallic strand specification (selectable)
Item Specification Strand materials ACS, AA, optional steel (as specified) Strand configuration Single or double layer; strand diameter/count per design Direction of lay S or Z (as specified) Lay length Declared for each layer in the final drawing/datasheet Surface condition As specified (material-appropriate finish and corrosion protection) 4.Mechanical performance (guaranteed per design)
Parameter How it is specified RTS / RBS Guaranteed minimum breaking strength of the completed cable EDS Utility-specified everyday stress for sag-tension design Elastic modulus Declared for completed cable design Coefficient of thermal expansion Declared for completed cable design Outer diameter (OD) Guaranteed for supplied design Weight Guaranteed for supplied design Minimum bending radius Declared for installation and permanent condition Vibration performance Evaluated per project requirements and agreed methods 5.Electrical performance (guaranteed per design)
Parameter How it is specified DC resistance Declared at reference temperature for completed cable Short-circuit capacity Declared as thermal rating (commonly I²t, kA²·s) and/or current-duration limits Maximum permissible temperature Declared for continuous operation and short-circuit event (per specification) Lightning shielding function Achieved through metallic cross-section and installation as overhead ground wire ■Testing and inspection
(Per contract: type tests / routine tests / acceptance tests.) Typical scope may include:
Dimensional inspection (OD, strand count, lay length)
Mechanical verification (breaking strength, elongation behavior)
Electrical verification (DC resistance; short-circuit rating validation per agreed method)
Optical verification (fiber count, continuity, attenuation at specified wavelengths)
Optical unit integrity checks (seal integrity and water-blocking performance per agreed plan)
■Packaging and delivery
Supplied on reels suitable for overhead cable transport and stringing
Reel length, maximum gross weight, and labeling per purchase order
Delivery documents typically include: packing list, cable marking record, fiber schedule, and test reports with the final guaranteed datasheet
■Ordering information
To provide a buildable design and guaranteed datasheet, please specify:
Installation environment (normal / coastal / industrial pollution)
Required fiber count and fiber type (e.g., G.652.D / G.655)
Target OD and weight limits (especially for shield-wire replacement projects)
Required RTS/RBS and span data (wind/ice loads, ruling span)
Required short-circuit rating (I²t or current-duration) and temperature limits
Preferred strand mix (ACS/AA) if required by utility standard
Reel length requirement and transport constraints
Aluminum Tube OPGW (AT) – Optical Ground Wire Cable
Aluminum Tube / Aluminum Pipe OPGW is an overhead ground wire that integrates optical fibers for communications while maintaining the grounding and shielding function of a conventional earth wire. The optical fibers are housed in a central aluminum tube (or aluminum pipe). The surrounding metallic strands provide the required rated tensile strength (RTS/RBS) and fault-current return capability for transmission line service. This design is often selected where a lightweight optical unit, good crush resistance, and a fully metallic construction are preferred.
Subcategory:
Key Words:
Factory
FAQ
How can I get a quotation?
Simply send us your inquiry with detailed specifications (product type, quantity, standards). Our sales team will provide a quotation within 24 hours.
Could I visit your factory?
Yes, we welcome and encourage factory visits. It provides an excellent opportunity for clients to gain firsthand insight into our production processes, technical capabilities, and quality control standards.
What payment methods do you accept?
We accept T/T, PayPal, and L/C at sight. Other options may be negotiable depending on the order.
How do you ship the products?
We support multiple shipping options: 1.Express (DHL, FedEx, UPS, TNT) for small orders; 2.Air freight or sea freight for bulk shipments; 3.EXW, FOB, CIF, and DDP terms are available.
What are your main export markets?
Our products are widely used in telecom operators, data centers, ISPs, and system integrators across Asia, Europe, North America, and the Middle East.
Do you provide technical support?
Yes. Our engineering team offers professional technical support, including product selection, network design advice, and troubleshooting assistance.
CONTACT US
Email: bynet@szbynet.com
Phone: +86 19925206282
Shenzhen Headquarter:
No. 45, North Dalang Road, Dalang Street, Longhua District, Shenzhen, Guangdong Province, China
Welcome To Leave a Message For Consultation
Cookie
Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy
Cookie
Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy
These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.
These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.
These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.
These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.