Stranded Stainless Steel Tube OPGW (SSST) – Multi-Tube Optical Ground Wire
Stranded Stainless Steel Tube OPGW (SSST) – Multi-Tube Optical Ground Wire
图片细节优化(1770111873292).png
  • Product Detail
  • ■Product description

    Stranded Stainless Steel Tube OPGW (SSST / Multi-Tube) is an overhead ground wire with integrated optical fibers. Instead of a single central tube, the optical fibers are housed in multiple stainless-steel loose tubes arranged within the stranded cable. The outer metallic strands are selected to meet the required mechanical strength and electrical thermal rating for transmission line service. This design is widely used when a project requires higher fiber counts and flexible fiber unit configuration.


    ■Typical construction

    1) Optical tube units (multi-tube)

    Multiple stainless-steel loose tubes positioned within the stranded cable

    Water-blocking filling compound (gel) inside tubes for moisture protection and fiber cushioning

    Single-mode optical fibers placed with appropriate slack/excess length (design dependent)

    Tube sealing method defined by the design and verified by the agreed test plan

    2) Metallic stranded layers

    Stranded metallic wires around the tube units, typically a combination of:

    Aluminum-clad steel (ACS) wires

    Aluminum alloy (AA) wires

    Optional steel strands (project dependent)

    Single or multiple stranded layers according to required RTS/RBS and short-circuit rating

    3) Water-blocking (options)

    Water-blocking yarns/tapes in cable interstices when required

    Protective compounds for stranded layers depending on environment and utility practice


    ■Key features

    Multi-tube fiber layout supports a wide range of fiber counts and routing plans.

    Fully metallic construction suitable for long-term overhead installation.

    Flexible mechanical/electrical design through strand material selection and cross-section sizing.

    Fiber protection provided by gel-filled stainless-steel tubes and controlled fiber placement.


    ■Standards and typical compliance

    IEEE 1138 – OPGW construction, performance, and testing (commonly specified)

    IEC 60794-4-10 – aerial optical cables along power lines (OPGW family)

    IEC 60793 / IEC 60794 – optical fiber and cable test methods

    ITU-T fiber recommendations (e.g., G.652, G.655), as specified


    ■Technical specification

    1.Optical specification (selectable)

    ItemSpecification
    Fiber typeSingle-mode per ITU-T (e.g., G.652.D, G.655) or as specified
    Fiber countProject-specified; selected based on tube count/size and fiber layout
    Fiber protectionGel-filled stainless-steel loose tubes + optional water-blocking system
    Fiber identificationStandard color sequence; fiber mapping list supplied with delivery
    Optical performanceAttenuation/dispersion/PMD declared by the selected fiber specification and provided in the final datasheet

    2.Stainless steel tube specification

    ItemSpecification
    Tube materialStainless steel
    Tube configurationMultiple loose tubes (quantity and dimensions per design)
    FillingWater-blocking compound (gel)
    SealingDefined by the final design and validated by agreed tests

    3.Metallic strand specification (selectable)

    ItemSpecification
    Strand materialsACS, AA, optional steel (as specified)
    Layer countSingle or multiple layers (per mechanical/electrical target)
    Lay directionS or Z (as specified)
    Lay lengthDeclared by layer in the final drawing/datasheet
    Surface conditionMaterial-appropriate finish and corrosion protection per specification

    4.Mechanical performance (guaranteed per design)

    ParameterHow it is specified
    RTS / RBSGuaranteed minimum breaking strength of the completed cable
    EDSUtility-specified everyday stress for sag-tension design
    Outer diameter (OD)Guaranteed for the supplied design
    WeightGuaranteed for the supplied design
    Elastic modulusDeclared for the completed cable design
    Coefficient of thermal expansionDeclared for the completed cable design
    Minimum bending radiusDeclared for installation and permanent condition
    Vibration performanceEvaluated per project requirements and agreed methods

    5.Electrical performance (guaranteed per design)

    ParameterHow it is specified
    DC resistanceDeclared at reference temperature for the completed cable
    Short-circuit capacityDeclared as thermal rating (commonly I²t, kA²·s) and/or current-duration limits
    Maximum permissible temperatureDeclared for continuous operation and short-circuit event (per specification)
    Ground wire functionProvided by the metallic cross-section and overhead installation position

    ■Testing and inspection

    (Per contract: type tests / routine tests / acceptance tests.) Typical scope may include:

    Dimensional checks (OD, tube/strand count, lay lengths)

    Mechanical verification (breaking strength and elongation behavior)

    Electrical verification (DC resistance; short-circuit capability per agreed method)

    Optical verification (fiber count, continuity, attenuation at specified wavelengths)

    Tube integrity checks (sealing and water-blocking performance per agreed plan)


    ■Packaging and delivery

    Supplied on reels suitable for overhead cable transport and stringing

    Reel length, gross weight limit, and labeling per purchase order

    Delivery documents typically include: packing list, cable marking record, fiber schedule, and test reports with the final guaranteed datasheet


    ■Ordering information

    • To provide a buildable design and guaranteed datasheet, please specify:
    • Installation environment (normal / coastal / industrial pollution)
    • Required fiber count and fiber type (e.g., G.652.D / G.655)
    • Target OD and weight limits (especially for shield-wire replacement)
    • Required RTS/RBS and span data (wind/ice loads, ruling span)
    • Required short-circuit rating (I²t or current-duration) and temperature limits
    • Preferred strand mix (ACS/AA) if mandated by a utility standard
    • Reel length requirement and transport constraints

Stranded Stainless Steel Tube OPGW (SSST) – Multi-Tube Optical Ground Wire

Stranded Stainless Steel Tube OPGW (SSST / Multi-Tube) is an overhead ground wire with integrated optical fibers. Instead of a single central tube, the optical fibers are housed in multiple stainless-steel loose tubes arranged within the stranded cable. The outer metallic strands are selected to meet the required mechanical strength and electrical thermal rating for transmission line service. This design is widely used when a project requires higher fiber counts and flexible fiber unit configuration.

Key Words:

Factory

factory
factory
factory
factory
factory
factory

FAQ

How can I get a quotation?

Simply send us your inquiry with detailed specifications (product type, quantity, standards). Our sales team will provide a quotation within 24 hours.

Could I visit your factory?

Yes, we welcome and encourage factory visits. It provides an excellent opportunity for clients to gain firsthand insight into our production processes, technical capabilities, and quality control standards.

What payment methods do you accept?

We accept T/T, PayPal, and L/C at sight. Other options may be negotiable depending on the order.

How do you ship the products?

We support multiple shipping options: 1.Express (DHL, FedEx, UPS, TNT) for small orders; 2.Air freight or sea freight for bulk shipments; 3.EXW, FOB, CIF, and DDP terms are available.

What are your main export markets?

Our products are widely used in telecom operators, data centers, ISPs, and system integrators across Asia, Europe, North America, and the Middle East.

Do you provide technical support?

Yes. Our engineering team offers professional technical support, including product selection, network design advice, and troubleshooting assistance.

Related Products

Product Inquiry

We will contact you within one business day. Please pay attention to your mail.

%{tishi_zhanwei}%