GYTA33 Direct Buried Fiber Optic Cable – Stranded Loose Tube, Aluminum Tape Armored, Double PE/MDPE Jacket
GYTA33 Direct Buried Fiber Optic Cable – Stranded Loose Tube, Aluminum Tape Armored, Double PE/MDPE Jacket
55b49133-a069-4e98-a723-8982020ac65e(1770367841920).png
  • Product Detail
  • ■Product Overview

    GYTA33 is an outdoor optical fiber cable intended for direct buried routes and other underground applications requiring enhanced mechanical protection. The cable uses a stranded loose tube core with water-blocking filling compound, a polymer-coated aluminum tape (APL) moisture barrier with inner sheath, and a layer of galvanized steel wire armor under an outer PE/MDPE sheath.


    ■Typical Applications

    1.Direct buried installation in telecom backbone / distribution routes

    2.Underground sections with higher mechanical risk (compression/impact)

    3.Water-exposed routes (project-dependent design), including lake/river or wet soil environments where specified


    ■Cable Construction

    Typical structure (center → outside):

    1.Optical fibers in PBT loose tubes, tubes filled with water-resistant compound

    2.Central strength member (steel wire in many designs)

    3.Stranding of loose tubes (and fillers, if used) around the strength member; core filled with flooding compound

    4.APL moisture barrier (polymer-coated aluminum tape) applied longitudinally

    5.Inner sheath (commonly PE/MDPE) extruded over the APL

    6.Steel wire armor (galvanized steel wires stranded around the inner sheath)

    7.Outer sheath (PE/MDPE, UV-resistant)


    ■Fiber Options

    Common configurations include:

    Single-mode: ITU-T G.652.D (typical)

    Multimode: available by request (specify OM grade for order)


    ■Fiber Identification

    12-color fiber sequence (typical):
    Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, Aqua.


    ■Mechanical & Environmental Performance (Typical)

    1.Minimum Bending Radius

    Without tension (static): 15 × cable OD

    Under maximum tension (dynamic): 30 × cable OD

    (Some designs may be specified as 12.5D/25D; confirm with the ordered design.)

    2.Allowable Tensile Strength (Representative)

    Long term: 4000 N

    Short term: 10000 N

    3.Allowable Crush Resistance (Representative)

    Long term: 3000 N/100 mm

    Short term: 5000 N/100 mm

    4.Temperature Range

    Installation: -20°C to +60°C

    Transport & Storage: -40°C to +70°C

    Operation: -40°C to +70°C


    ■Typical Optical Characteristics (Single-Mode)

    Example published limits for single-mode fiber used in GYTA33 designs include:

    Attenuation (max):

    1310 nm ≤ 0.35–0.36 dB/km

    1550 nm ≤ 0.21–0.22 dB/km

    1625 nm ≤ 0.24 dB/km (when specified)

    Cable cut-off wavelength: ≤ 1260 nm


    ■Typical Dimension & Weight Data (Reference)

    The following tables show representative examples from published designs. Actual OD/weight varies with tube configuration, sheath thickness, and armor wire size.

    1.Example: 24-core Design (Double sheath, steel wire armor)

    ItemValue
    Fiber count24
    Design (strength member + tube/filler)1+6
    Cable OD14.2 mm
    Approx. weight370 kg/km
    Bending radius (static/dynamic)15D / 30D
    Temperature (install / storage / operation)-20~+60 / -40~+70 / -40~+70 °C

    2.Typical Multi-count Examples (12–144 cores)

    Fiber CountStructureCable OD (mm)Cable Weight (kg/km)Crush (N/100mm)
    121+513.0 ±0.52705000
    241+513.0 ±0.52715000
    361+613.0 ±0.52925000
    481+513.7 ±0.52955000
    721+614.4 ±0.53355000
    961+816.0 ±0.53895000
    1441+1219.4 ±0.56015000

    ■Routine Tests & Acceptance (Commonly Referenced)

    Published specifications commonly reference:

    Tensile test: IEC 60794-1-2-E1 with loss change and no damage criteria

    Crush test: IEC 60794-1-2-E3

    Impact test: IEC 60794-1-2-E4

    Temperature cycling: commonly referenced to YD/T 901 test steps in some published specs


    ■Sheath Marking & End Sealing

    Sequential length marking is commonly printed at approximately 1 m intervals with length accuracy typically controlled within ±1%.

    Marking content typically includes manufacturer name, cable type, date code, and length marking.

    Cable ends are commonly sealed with heat-shrink end caps to reduce water ingress during shipping/storage.


    ■Packaging, Storage, Handling

    Standard supply on wooden drum; drum length depends on cable size and logistics.

    Keep ends sealed until installation; avoid exceeding allowable pulling tension and maintain bending radius during pulling and routing.

GYTA33 Direct Buried Fiber Optic Cable – Stranded Loose Tube, Aluminum Tape Armored, Double PE/MDPE Jacket

GYTA33 is an outdoor optical fiber cable intended for direct buried routes and other underground applications requiring enhanced mechanical protection. The cable uses a stranded loose tube core with water-blocking filling compound, a polymer-coated aluminum tape (APL) moisture barrier with inner sheath, and a layer of galvanized steel wire armor under an outer PE/MDPE sheath.

Key Words:

Factory

factory
factory
factory
factory
factory
factory

FAQ

How can I get a quotation?

Simply send us your inquiry with detailed specifications (product type, quantity, standards). Our sales team will provide a quotation within 24 hours.

Could I visit your factory?

Yes, we welcome and encourage factory visits. It provides an excellent opportunity for clients to gain firsthand insight into our production processes, technical capabilities, and quality control standards.

What payment methods do you accept?

We accept T/T, PayPal, and L/C at sight. Other options may be negotiable depending on the order.

How do you ship the products?

We support multiple shipping options: 1.Express (DHL, FedEx, UPS, TNT) for small orders; 2.Air freight or sea freight for bulk shipments; 3.EXW, FOB, CIF, and DDP terms are available.

What are your main export markets?

Our products are widely used in telecom operators, data centers, ISPs, and system integrators across Asia, Europe, North America, and the Middle East.

Do you provide technical support?

Yes. Our engineering team offers professional technical support, including product selection, network design advice, and troubleshooting assistance.

Related Products

Product Inquiry

We will contact you within one business day. Please pay attention to your mail.

%{tishi_zhanwei}%