- Product Detail
-
■Product Overview
GYTA53 is an outdoor optical fiber cable designed for direct buried installation. The cable adopts a stranded loose tube structure with gel-filled tubes and core flooding for water blocking. A plastic-coated aluminum tape (APL) provides a moisture barrier and is followed by a PE inner sheath, then a plastic-coated steel tape (PSP) armor layer and a PE outer sheath for mechanical protection in underground environments.
■Typical Applications
Direct buried routes (OSP backbone / distribution)
Underground sections with higher risk of crush, impact, and moisture exposure
Duct / trench segments where additional mechanical protection is required (project-dependent)
■Cable Construction
From center outward (typical design):
Optical fibers (250 μm) in PBT loose tubes; tubes filled with water-resistant compound
Central strength member: metallic strength member (commonly steel wire; PE-coated option for certain counts)
Stranding: loose tubes (and fillers) stranded around the central strength member into a compact circular core
Core flooding / water blocking: filling compound + water blocking yarn/material in the core
APL layer (plastic-coated aluminum tape) as moisture barrier
PE inner sheath extruded over the APL/core
PSP armor (plastic-coated steel tape, longitudinally applied; corrugated steel tape is also referenced by some designs)
PE outer sheath (UV-resistant)
■Fiber Options
Depending on order configuration:
Single-mode: ITU-T G.652 (commonly G.652.D)
Multimode: available by request (specify OM grade if required)
■Fiber & Tube Color Identification
Standard 12-fiber color sequence:
Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, Aqua■Mechanical & Environmental Performance (Typical)
Allowable Tensile & Crush (Representative, direct buried grade):
A commonly published direct-buried grade is:
Tensile load (Short / Long term): 3000 N / 1000 N
Crush resistance (Short / Long term): 3000 N/100 mm / 1000 N/100 mm
Minimum Bending Radius:
Static: ≥ 12.5 × cable OD
Dynamic: ≥ 25 × cable OD
Temperature Range (Typical):
Installation: -20°C to +60°C
Transport & Storage: -40°C to +70°C
Operation: -40°C to +70°C
■Typical Dimensions & Weight (FiberHome Reference Table)
The table below is a published reference for common GYTA53 designs (OD/weight may vary by tube configuration, sheath thickness, and strength member selection).
Fiber Count Nominal OD (mm) Nominal Weight (kg/km) Max Fibers per Unit Tube Units Tensile (Short/Long, N) Crush (Short/Long, N/100mm) 2–36 13.9 202 6 6 3000 / 1000 3000 / 1000 38–72 15.1 241 12 6 3000 / 1000 3000 / 1000 74–96 17.1 290 12 8 3000 / 1000 3000 / 1000 98–120 18.6 333 12 10 3000 / 1000 3000 / 1000 122–144 20.2 381 12 12 3000 / 1000 3000 / 1000 >144 Designed per customer requirement — — — — — ■Optical Characteristics (Single-Mode, ITU-T G.652 Typical Limits)
When G.652 fiber is specified, commonly published limits include:
Attenuation (max):
1310 nm ≤ 0.35 dB/km
1383 nm ≤ 0.32 dB/km
1550 nm ≤ 0.21 dB/km
1625 nm ≤ 0.24 dB/km
Chromatic dispersion (max):
1550 nm ≤ 18 ps/(nm·km)
1625 nm ≤ 22 ps/(nm·km)
Cable cut-off wavelength: ≤ 1260 nm
■Water Penetration (Typical Test Statement)
Example published water penetration requirement: 1 m water head, 3 m sample, 24 h; no water ingress.
■Standards & Compliance (Common References)
GYTA53 is commonly supplied to meet outdoor cable standards such as IEC 60794-1 and regional standards (some manufacturers reference YD/T 901 alongside IEC requirements).
■Marking, Packaging, Storage
Sheath Marking:
Sequential meter marking and manufacturer/type information are commonly used; marking format can be customized per order (language, unit, special text).
Packaging:
Standard supply on wooden drum; length per drum depends on cable size and logistics requirement.
Storage & Handling:
Keep cable ends sealed until installation.
Avoid impact damage to drum flanges and do not exceed allowable pulling tension.
Maintain the specified minimum bending radius during pulling and routing.
■Factory Overview



GYTA53 Direct Buried Fiber Optic Cable – Stranded Loose Tube, Aluminum Tape Armored, Steel Tape Armored, Double PE/MDPE Jacket
GYTA53 is an outdoor optical fiber cable designed for direct buried installation. The cable adopts a stranded loose tube structure with gel-filled tubes and core flooding for water blocking. A plastic-coated aluminum tape (APL) provides a moisture barrier and is followed by a PE inner sheath, then a plastic-coated steel tape (PSP) armor layer and a PE outer sheath for mechanical protection in underground environments.
Subcategory:
Key Words:
fiber optic cables
fiber optic cable
Factory
FAQ
How can I get a quotation?
Simply send us your inquiry with detailed specifications (product type, quantity, standards). Our sales team will provide a quotation within 24 hours.
Could I visit your factory?
Yes, we welcome and encourage factory visits. It provides an excellent opportunity for clients to gain firsthand insight into our production processes, technical capabilities, and quality control standards.
What payment methods do you accept?
We accept T/T, PayPal, and L/C at sight. Other options may be negotiable depending on the order.
How do you ship the products?
We support multiple shipping options: 1.Express (DHL, FedEx, UPS, TNT) for small orders; 2.Air freight or sea freight for bulk shipments; 3.EXW, FOB, CIF, and DDP terms are available.
What are your main export markets?
Our products are widely used in telecom operators, data centers, ISPs, and system integrators across Asia, Europe, North America, and the Middle East.
Do you provide technical support?
Yes. Our engineering team offers professional technical support, including product selection, network design advice, and troubleshooting assistance.